Elite Piping Manufacture is a powerful manufacturer of DN32 pipe fittings. If you need DN32 pipe fittings now, you might as well learn about our company’s related products.

DN32 Pipe Fittings

As we all know, the size of the valve caliber is inevitably related to the size of the pipeline. Usually, the size of valve is matched with the size of pipeline (outer diameter). The valve caliber needs to be calculated based on actual parameters. Generally speaking, pipelines are larger and valves are smaller. It mainly depends on the flow rate that needs to be controlled by the valve position, while the pipeline size only needs to have enough flow capacity.

Pipe fittings are a general term for parts in pipeline systems that play the role of connection, control, direction change, flow diversion, sealing, support, etc. Pipe fittings cover a wide range, the most common ones are flanges, unions, pipe clamps, ferrules, throat clamps, tees, etc.

Different Types Of DN32 Pipe Fittings

Different types of DN32 pipe fittings provide us with more choices. We can choose the corresponding pipe fittings according to our production needs. Pipe fittings are a general term for the parts in the pipeline system that connect, control, change direction, divert, seal, support, etc. Pipe fittings include a wide range; common ones include flanges, unions, pipe hoops, ferrules, hose hoops, tes, etc.

• Flange: A part that connects pipes, mainly used to connect pipe ends.
• Union: Also called oil joint, it is mainly used to connect matching hardware accessories and can be installed in various pipeline interfaces.
• Pipe clamp: A commonly used accessory in industrial pipeline connections. It is a short section of pipe used to connect two pipes.
• Card sleeve: It is a stainless steel pipe connection piece mainly used in mechanical pipe connection systems such as water treatment and municipal water supply systems.
• Hose hoop: It is an ideal connection fastener, suitable for fasteners connecting soft and hard pipes above 30mm, and has a beautiful appearance after assembly.
• Elbow: A type of connecting pipe fitting commonly used in plumbing installations. It connects pipe corners and changes the direction of the pipe.
• Bend pipe: Use a complete set of bending molds. No matter what kind of machinery, equipment, and pipes are used, most bends are used.
• Reducer: Also known as large and small heads, it is used to connect two different pipe diameters and is divided into concentric and eccentric heads.
• Reducing elbow: When making a 90-degree turn, the diameter of the pipe is changed. There are hot-pushed elbows, stamping elbows, and welded elbows.
• Branch pipe stand: a reinforced pipe fitting used for branch pipe connections, replacing reducing tees, reinforcing plates, reinforced pipe sections, and other connection types.
• Tee: A tee is a pipe connecting piece, also called a pipe fitting tee, tee pipe fitting, or tee joint. It is used in the branch pipe of the main pipeline.
• Cross: Used to connect four pipes with the same diameter and the same vertical direction. It is mainly used to divert or change directions.
• Gasket: A material placed between two flat surfaces to enhance the seal, a sealing element placed between tight covers to prevent fluid leakage.
• Raw material tape: a commonly used auxiliary product in plumbing installation, used at pipe joints to enhance the tightness of pipe joints.
• Linen is a commonly used auxiliary product in plumbing installation. It wraps around the threads of pipe fittings to seal and prevent water leakage.
• Blind flange: Also known as blind flange, the real name is blind plate. It is a connection form of flange. It is a flange without a hole in the middle.
• Pipe plugs: refer to externally threaded pipe fittings that block the internal threads at the ends of pipes, including square pipe plugs, hexagonal pipe plugs, etc.
• Head: It is a component of the container, which refers to the element used to close the end of the container to isolate the internal and external media, also called the end cap.
• Welding plugs: Used to protect some parts of the welded parts that need protection or are easily injured or deformed during the welding process.
• Pipe clamp: a pipe fitting used to fix pipelines. It is a pipe fitting commonly used in plumbing installations and is used to fix pipes.
• Valve: a control component in a fluid delivery system, with functions such as cut-off, regulation, diversion, pressure stabilization, flow diversion or overflow pressure relief.
• Compensator: It is composed of the bellows of its working body and end pipes, brackets, flanges, conduits and other accessories. It is a compensation component.
• Dirt remover: Prevent impurities in pipeline media from entering transmission equipment or precision parts, causing production failures or affecting product quality.
• Reinforcement tube: Reinforcement means increasing strength. Improves the strength of the area by increasing the force-bearing area, which is basically a forged tube.
• Clasp: The clasp is the main retainer for removable denture repair. It is made of metal and mainly serves to retain, stabilize, and support the denture.
• Tow hook: refers to the hook on the tugboat that is used to hook and hang the tow rope and facilitate release. It can be divided into spring tow hook, hydraulic tow hook, remote control tow hook, etc.
• Lifting ring: A lifting ring is a type of industrial spreader. It is a device used in lifting machinery to lift heavy objects. Common lifting rings include round and pear-shaped rings.
• Brackets: The trusses that support the middle roof truss are called brackets. They generally use parallel chord trusses, and their web members adopt a herringbone system with vertical bars.